Organic material decomposing agent

The organic material decomposition agent was jointly developed by Shandong Jinniu Group. It is a newly developed fermentation decomposition agent. It has shown strong advantages in many uses of this product!

Organic fertilizer raw materials suitable for adding this product include: livestock and poultry manure, urban organic waste, chaff, cake, sludge, agricultural and forestry waste, as well as rice husk, product processing waste (sucrose puree, fruit pomace, tea residue , mushroom residue, distiller's grains, Chinese herbal medicine residue, furfural residue, crop straw, etc.).

【Effectiveness and Features】

1. This product has wide adaptability, fast heating speed, strong decomposition ability, and thorough deodorizing effect.

2. When the temperature rises quickly above 0℃, the temperature can rise to above 60℃ in 2 days. It can fully decompose organic sulfides, organic ammonia compounds, etc. that produce odor in livestock and poultry manure. The odor will be greatly reduced 2-3 days after heating.

3. The fermentation cycle is as short as 15-20 days to reach the basic decomposition state.

4. The high temperature (60℃-70℃) during the fermentation process can permanently kill bacteria, insect eggs, and weed seeds in the fermentation material.

5. Compost has less total nutrient loss, high humus content, and significantly increased potassium content.

【Dosage】

One kilogram of this product can ferment 2-3 tons of materials.

When using, first wet the starter with rice bran or cornmeal or dry fermentation material evenly, then mix it into the fermentation material, mix evenly, and pile it into a pile (the pile height is controlled between 0. 6-1 meters in summer and 0. 8 in winter). -1. 6 meters, and cover it with film or straw curtains. When the internal temperature rises to 25°C, remove the covering). When the temperature rises above 45°C (temperature rises to 55°C in winter), start turning the pile once. In the future, whenever the temperature of the pile reaches above 60°C, it needs to be turned. The basic decomposition state can be reached in 15-20 days.

The materials must be pre-treated before use; mix several materials that need to be decomposed and adjust the moisture content to about 55-60% (moisture content: hold a handful of padding tightly with your hands, and see that there are marks on the seams without water dripping) ).

Signs of completion of decomposition: the pile temperature decreases, the material is loose, no odor, slightly ammonia smell, and the pile is covered with white mycelium.

The decomposed raw fertilizer can be used directly, or it can be produced into organic fertilizer, bio-organic fertilizer, organic-inorganic compound fertilizer, etc.